EE360 Moisture in Oil Transmitter

 EE381 Transmitter/ Switch
 EE364 Miniature Transmitter

 OILPORT 30 Handheld Meter

 

 EE300Ex Transmitter

 

 

The E+E Moisture in Oil Instruments

E+E moisture in oil transmitters meet the highest requirements of a wide range of applications. The devices measure water activity (aw) and oil temperature (T) and calculate the water content (x) in parts per million (ppm).

  • EE360 moisture in oil transmitter
    EE360 moisture in oil transmitter with 3.5“ TFT display.
  • EE360 moisture in oil transmitter with stainless steel enclosure
    EE360 with stainless steel enclosure
  • EE360 remote probe with ball valve
    The ball valve mounting set enables easy mounting and removal of the probe even without process interruption.
  • EE360 modular enclosure
    The modular enclosure consisting of mounting part (1) and active part (2) facilitates installation and maintenance of the EE360.

EE360 – Moisture in Oil Transmitter

High-end Device for Reliable Oil Condition Monitoring

The EE360 can be employed in oil up to 180 °C (356 °F) and 20 bar (290 psi). The multi-functional display shows all measured values simultaneously and facilitates configuration and adjustment of the transmitter. The built-in data logger stores 20.000 values per measurand and shows them as graph on the 3.5” TFT colour display. With the optional ball valve set the probe can be mounted and removed without process interruption.

 Oil temperature up to 180 °C (356 °F)

 Pressure rating 20 bar (290 psi)

 Rugged IP65 polycarbonate or stainless steel enclosure

 3.5“ TFT colour display with datalogger-function

 Analogue, relay and digital outputs (Modbus RTU / Modbus TCP)

EE381 – Compact Moisture in Oil Transmitter / Switch

The Professional Monitoring Solution in a Compact Design

The EE381 is suitable for inline mounting. The transmitter body can rotate 360° relative to the front end. This ensures optimal readability of the LC display and positioning of the cable outlet independent of the mounting position.

The EE381 version with two relay outputs is ideal for control and alarm purposes.

 Oil temperature range up to 120 °C (248 °F)

 Pressure rating 20 bar (290 psi)

 IP65 aluminum enclosure

 Two analogue or relay outputs

 Optional LC display with status LEDs

  • EE381 Moisture in oil transmitter
    EE381 – Compact moisture in oil transmitter with LC display.
  • EE381 Moisture in oil switch
    EE381 – Moisture in oil switch with status LED.

EE364 – Miniature Moisture in Oil Transmitter

The Space-Saving Solution for the Most Demanding Applications

The compact design and IP65 stainless steel enclosure allow a space-saving installation of the EE364 for inline oil condition monitoring.

The measured values are available on two 4-20 mA outputs and a Modbus RTU interface. The analogue outputs can be individually scaled and configured.

 Oil temperature range up to 100 °C (212 °F)

 Pressure rating 20 bar (290 psi)

 IP65 stainless steel enclosure

 Two 4-20 mA outputs

 Modbus RTU interface    

  • EE364 Miniature Moisture in Oil Transmitter
    EE364 – Miniature moisture in oil transmitter in a robust stainless steel enclosure.
  • OILPORT 30 Set - Handheld Meter for Moisture in Oil
    OILPORT 30 Set – Moisture in oil handheld meter with ball valve mounting set.
  • OILPORT 30 Set - Handheld Meter in Carry Case
    Practical carry case for handheld, probe and accessories.
  • OILPORT 30 - Probes
    Pressure-tight oil probe up to 20 bar / 290 psi (above), short oil probe for easy measurements of oil samples (below).

OILPORT 30 Set – Handheld Meter for Moisture in Oil

The Ideal Tool for Reliable Offline Oil Condition Measurement

The OILPORT 30 handheld meter is dedicated to portable monitoring of moisture and temperature in industrial oils.

The user can store up to 10 sets of oil specific parameters in the hand-held to be used for accurate calculation of the water content in certain oils.

The short oil probe is ideal for testing oil samples, while in-line monitoring can be carried out with the pressure-tight probe (up to 20 bar/290 psi).

Together with the optional ball valve, the pressure-tight oil probe can be installed and removed without interruption of the oil flow.

 Capacitive TFT touch screen

 Data logging function

 Internal memory for 2 million measured values

 Optional calibration kit for 1 and 2 point adjustment

 Practical carry case

EE300Ex – Moisture in Oil Transmitter for Explosion Hazard Areas

The Professional Measuring Device for Intrinsically Safe Applications

The EE300Ex is dedicated for use in explosion endangered environment up to zone 0 / 20 (Division 1).

Mounting and removal of the probe without process interruption is possible with the optional ball valve set up to 20 bar (290 psi). The probe with cut-in fitting allows moisture in oil measurement with pressure rating up to 300 bar (4351 psi).

The EE300Ex can be used for humidity and temperature measurement in air as well.

+ ATEX, IECEx, FM, TIIS-certified

+ Stainless steel enclosure and probe

+ Oil T range -40…180 °C (-40...356 °F)

+ Pressure rating up to 300 bar (4351 psi)

+ Two 4 - 20 mA Outputs

  • EE300Ex - Intrinsically Safe Moisture in Oil Transmitter
    EE300Ex – Intrinsically safe moisture in oil transmitter.
  • EE300Ex - probe for ball valve mounting
    EE300Ex - Probe for ball valve mounting up to 20 bar / 290 psi.
  • EE300Ex - probe with cut-in fitting
    EE300Ex - Probe with cut-in fitting for moisture in oil measurement up to 300 bar / 4351 psi.

E+E Elektronik - Your Partner in Sensor Technology

Since more than 20 years, E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dew point, moisture in oil, air velocity, mass flow, CO2 and pressure.

The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry.

A certified quality management system according to ISO 9001 and IATF 16949 ensures the highest quality standards.

E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States.

The accredited E+E calibration laboratory has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.

  • E+E Elektronik Headquarters
    E+E Elektronik Headquarters, Engerwitzdorf/ Austria.